The current status shows that your boat is progressing well in Fitout 2 stage.
The boat has recently been equipped with some critical components, bringing it closer to the Detailing & QA stage. At this point, the glass and deck-gear installations have been completed. Our team has also installed the fuel system and bilge system.
We are now working on electrical cabling and the fresh-water system, and the black-water system installation has reached 80% completion.
Your boat has been progressing well in the Fit-out stage.
At this stage, some major installations have already been completed, including the exterior and interior gelcoat works, glass installation, forebeam installation, and fuel system installation. Deck gear installations are approximately 70% complete, while work on the freshwater and blackwater systems is ongoing. Electrical cabling is scheduled to begin next week as the team continues to make steady progress through this phase of production.
Your boat has been moved to the new stage – Fitout.
The boat has recently been equipped with some components that make significant progress. The exterior gelcoat works have been completed, while the interior gelcoat application is currently ongoing. Glass installation has also been finalized. In the coming days, we will begin installing the deck gear, and the forebeam installation is scheduled to take place within this week.
During the Assembly stage 2, significant progress has been made in preparing your boat for the subsequent phase.
At this point, the hull-deck interior lamination has been completed, and the aluminum back plates were laminated. We are now working on exterior and interior gelcoats repairs.
Your boat is progressing well in the Assembly stage.
Recently, some detailed parts have been installed including all furniture. In the meantime, all ceiling liners have also been glassed to furniture. Currently, we’re working on exhaust system installations, and deck-on preparations.
Your boat has now entered the next stage – Assembly.
At this point, the hull deck joint has been completed. Installation of the starboard aft cabin and portside aft head has also been finished, along with the engine and exhaust system. Ceiling liners have already been installed in the starboard forward head, starboard aft cabin, and portside aft head. We’re now working on the hull-deck interior laminations.
An exciting journey has just started. Your boat has been progressing well in our lamination stage.
As you can see in the photos, the hull has already been demolded, and all bulkheads, omega, and Spyder have been installed. Additionally, the forward cabins and bathrooms have been completed, along with the installation of the fuel tanks. The bulkheads are also finished, and all furniture, except for the center furniture, has been vacuum-infused and installed.
